It’s the 12 Business Days of Christmas Give Away! Image Armor is going to be giving away 12 complete change over kits of our popular E-SERIES inks starting December 9th, 2015! That’s right – giving away complete ink change over kits…. It’s our way of saying Merry Christmas to twelve […]
Monthly Archives: November 2015
10 posts
We wanted to show everyone how important it is to ensure that your DTG ink is properly cured. Figure 1 shows two different shirts with the same image printed. The garment is a 100% black polyester fabric with the Image Armor E-SERIES inks. This picture is after just one wash and […]
TIP #1: PRETREATING AND CURING THE PRETREATMENT FOR 100% BLACK POLYESTER PRINTING You will typically need MORE pretreatment than a standard 100% cotton garment. Try starting your testing with 30-40 grams of ULTRA pretreatment. This means the shirt is going to be WET! Try Hover Curing…… this will require NO […]
Many DTG printers today are utilizing what can easily be called the DTG IV Bag Ink System. That is because if you have ever been to a hospital and been hooked up to one, you know it looks exactly like an intravenous drip system used to administer drugs into a […]
Every now and then we get reports from around the world about our inks and pretreatments. I was sick the past couple of days and when I saw this video, it made my day. They had switched from Dupont over to our Image Armor E-SERIES inks and said they this […]
It’s fun for us to do the trade shows circuit with the Image Armor products. We often get DTG printers who stop by our booth and have never tried any of the Image Armor pretreatments. When they see what our pretreatments are capable of letting them achieve, they start to get excited. […]
WHAT WE FOUND During our routine printing and testing procedures we came across something that we though should be shared with our customers in regards to shirts, pretreatment and inks. We were printing some white 100% polyester fabric shirts that were pretreated with 16g of the Image Armor LIGHT Shirt Formula. […]
Adam from Surf Signs and Designs in Myrtle Beach, SC stopped by our booth at the 2015 Atlanta SGIA to talk to us about what he likes about using the Image Armor LIGHT Shirt Formula with the Brother GT3 garment printer and polyester fabrics.
Image Armor announces that Capricorn of Piekoszów, Poland is the newest Image Armor dealer. Capricorn, located in Southern Poland, is a full service DTG printer and consumable supplier and carries a complete line of the Image Armor E-SERIES inks and pretreatment solutions. For DTG printers in Poland interested in learning more about […]
Jim Crumby stopped by the Ft Worth Imprinted Sportswear Show and talked a little bit about his use of Image Armor products and what he thinks about them. His company RJ Designs uses the E-SERIES DTG Inks and pretreatments and loves printing on 100% polyester and blends with the inks. […]